We have vide capacity available in shop and neighboring areas. Our capacity in various activities is as under: -

Forming

Thickness up to 63 mm can be bent and rolled in length up to 2500 mm. Higher thickness can be formed in shorter length.

Manufacturing

We have a large shop floor area totally covered by Cranes with maximum lifting capacity of 60 M.T. The total area under the crane presently is 56,000 sq. feet. With the expansion that is to be completed by December 2007, the area will be increased to 74,000 sq. feet.

Testing

Material testing facilities of Chemical hardness tensile, microscopic are available. Non-Destructive tests liquid penetration, Ultrasonic crack detection, Radiography also available. Pressure testing (Pneumatic, hydraulic or oil) is done at required pressure. Facilities available for recording deformation permanent or temporary during pressure testing. Paint film thickness and adhesion test also conducted.

Surface Preparation

Prior to surface treatment the surface is Degreased, Pickled or shot blasted as required by the customer and the facilities are available for such activities.

Installed Capacity

We have an installed capacity of over 5000 MT per annum.

Machining capabilities

There is extensive machining capabilities exist within the unit. Lathes, 2200 mm dia, 8000 mm long, Horizontal borer with 135 mm spindle, Vertical milling, and other machines makes the shop very versatile to manufacture an vide range of products.